BOSS & STUD

Drilled and tapped bosses on back of sign. Threaded studs for concealed mounting to brick, stone or cement.

HOW-TO-DO-IT

1. Screw studs into threaded bosses in back of plaque.

2. Using studs to locate points on mounting surface, drill holes in mounting surface slightly larger than threaded stud.

3. If wall is solid such as cement or brick;

   1. Discard washers and nuts. Fill holes using 'Liquid Nails', 'Epoxy' or other permanent mastic.

   2. Push studs into the holes and anchor plaque until mastic hardens.

4. If you can get to the back of the wall;

   1. Insert studs through holes and have it held in place.

   2. From the rear, place washers on studs and secure with nut.