YOU ARE HERE: Skip Navigation LinksHome > Products > Donor Recognition Ideas > Donor Recognition Trees > Traditional design


Traditional Donor Recognition Trees with Cast Bronze Trunks


Traditional Donor Recognition Trees with Cast Bronze Trunks
Traditional Trunk
Traditional Donor Recognition Trees with Cast Bronze Trunks and Optional Plaque
Traditional Trunk with
optional plaque

PRODUCT DESCRIPTION

Traditional donor recognition trees

Our traditional donor recognition trees with cast bronze trunks are our most popular since they can 'grow' as the success of your donor program grows.  The donor trees shown on this page incorporate the large 'traditional' design cast bronze trunk which is available with or without the integral 8" by 8" cast bronze plaque. The canopies use the same leaves and clear acrylic material as our modern trunk models as well as the models with cast integral stones.  These models are available with either fixed size canopies or expandable canopies which can 'grow' with your donor program requirements.  The fixed size canopy models encompass 188 leaves through 450 leaves. The expandable models start with either 279 leaves, expanding to a maximum of 710 leaves or 450 leaves expanding to a maximum of 792 leaves.  All of these trees are also available using the cut metal polished brass 'modern' trunk as modern model donor trees.

All of our donor recognition trees are provided with the full amount of leaves attached to the clear acrylic canopy with 2 screws on each leaf.  All required mounting hardware, as well as a paper mounting template, is also included.  Leaves can be provided in up to 3 different colors; brass, aluminum and copper for different levels of giving.  The tree canopy is manufactured from 1/4 inch thick clear acrylic sheet and, when installed, projects 1 inch from the wall.  The trunk of these traditional donor trees is 4 inch thick cast bronze and weighs about 85 pounds.  These trees are for interior mounting only.


Download our Donor Tree Installation Instructions.


TRADITIONAL DONOR RECOGNITION TREES
With expandable canopies



 


Must use this if using
either side canopies
Model DRT-03 117 Leaf Expansion
Model DRT-03A
117 leaf expansion canopy
add-on
May use only one set
of side canopies
Model DRT-03 225 Leaf Expansion
Model DRT-03B
225 leaf expansion canopy
add-on
May use only one set
of side canopies
Model DRT-03 155 Leaf Expansion
Model DRT-03C
155 leaf expansion canopy
add-on


TRADITIONAL DONOR RECOGNITION TREES
With fixed size (non-expandable) canopies



DONOR RECOGNITION PROGRAM ACCESSORIES

Large engravable 'stone' for donor trees
Engraveable 'Stone'
7-1/2" by 5"
Cast Bronze 'stone' for donor trees
Cast Bronze
'Stone' 12" by 8"
Small engravable 'stone' for donor trees
Small
Engraveable 'Stone'
5-1/2" by 3-1/2"

Engravable French cruve leaf for donor trees
French Curve
Leaf
Engravable straight cruve leaf for donor trees
Straight
Left
Large engravable plate for donor trees
Large
Engraveable Plate

Engraving of leaves can be handled by most local trophy shops. Each leaf typically holds 3 lines of text. For best appearance, leaves should be engraved on a rotary engraver and anodized.