YOU ARE HERE: Skip Navigation LinksHome > Products > Donor Recognition Ideas > Donor Recognition Trees > Contemporary design


Donor Recognition Trees with Modern Polished Brass Trunks


Modern Donor Recognition Trees with Modern Polished Brass Trunk
Modern Trunk

PRODUCT DESCRIPTION

Modern donor recognition trees

These are our most popular donor trees since they can 'grow' as the success of your donor program grows.  The modern donor recognition trees shown on this page incorporate the large 'modern' design polished brass trunk. The canopies use the same leaves and clear acrylic material as our traditional trunk models as well as the models with cast bronze stones.  These models are available with either fixed size canopies or expandable canopies which can 'grow' with your donor program requirements.  The fixed size canopy models encompass 188 leaves through 450 leaves. The expandable models start with either 279 leaves, expanding to a maximum of 710 leaves or 450 leaves expanding to a maximum of 792 leaves.  All of these trees are also available using the cut metal polished brass 'modern' canopy as modern model donor trees.

All of our donor recognition trees are provided with the full amount of leaves attached to the clear acrylic canopy with 2 screws on each leaf.  All required mounting hardware, as well as a paper mounting template, is also included.  Leaves can be provided in up to 3 different colors; brass, aluminum and copper for different levels of giving.  The tree canopy is manufactured from 1/4 inch thick clear acrylic sheet and, when installed, projects 1 inch from the wall.  The trunk of these modern donor trees weighs about 65 pounds.  These trees are for interior mounting only.

See the bottom of this page for additional accessories, including engraving 'stones'.


Download our Donor Tree Installation Instructions.


Donor Trees with Modern Polished Brass Trunks
With expandable canopies


 


Must use this if using
either side canopies
Model DRC-03 117 Leaf Expansion
Model DRC-03A
117 leaf expansion canopy
add-on
May use only one set
of side canopies
Model DRC-03 225 Leaf Expansion
Model DRC-03B
225 leaf expansion canopy
add-on
May use only one set
of side canopies
Model DRC-03 155 Leaf Expansion
Model DRC-03C
155 leaf expansion canopy
add-on


MODERN DONOR RECOGNITION TREES
With fixed size (non-expandable) canopies



DONOR RECOGNITION PROGRAM ACCESSORIES

Large engravable 'stone' for donor tree
Engraveable 'Stone'
11-1/2" by 8"
Cast Bronze 'stone' for donor trees
Cast Bronze
'Stone' 12" by 8"
Small engravable 'stone' for donor tree
Small
Engraveable 'Stone'
7" by 4-3/4"

Engravable French cruve leaf for donor trees
French Curve
Leaf
Engravable straight cruve leaf for donor trees
Straight
Left
Large engravable plate for donor trees
Large
Engraveable Plate

Engraving of leaves can be handled by most local trophy shops. Each leaf typically holds 3 lines of text. For best appearance, leaves should be engraved on a rotary engraver and anodized.